Modulo rettificatore | DC Power Supply

Categorie di prodotti

Prodotti in primo piano

48VDC &220Inverter parallelo modulare VDC senza batteria inverter a onda sinusoidale pura 3kw inverter modulare
19 Inch 110vdc & 220Alimentatore inverter per inverter manuale inverter VDC
DC 48V 10000 Watt Inverter 10kva Pure Wave Sine Power Inverter Telecom 4U Rack Mount Inverter
Sistema di alimentazione incorporato 3U DC 48V 150A Alimentatore di commutazione
BWITT monofase da 48v a AC220V 1000W inverter a onda sinusoidale pura 1000W con SNMP

Contattaci

Copyright @2025 Shenzhen Bwitt Co., Limitato
Telefono:+86-18820237701
WhatsApp：+86 18822867573
E-mail:support@bwitt.com.cn
Indirizzo:9 / F, Edificio 20, Arex Science and Technology Industrial Park, 19 East Huifeng Road, Zona ad alta tecnologia Zhongkai, Città di Huizhou, Provincia del Guangdong

Sistema di alimentazione incorporato 40A Sistema di raddrizzatore modulare 100 AMP 24VDC AC a CC Alimentazione con funzione batteria

Telecom Rectifier System rectifier in telecom

Vedi altre foto

Descrizione:

RCT-2000 modular rectifier system is widely deployed in the telecom/industrial field. It provide telecom power technology to modulate voltage for DC load and maintain back-up batteries.It treble hot swap rectifier modules build a N+1 redundancy, have high fault tolerant reliablity for important load. To adaptable in different external power system, the powerful monitor have 45 Opzione di allarme, Supporto operazione remota RS485/ SNMP.

Modello：

24/220-30UN
24/220-40UN
24/220-60UN
24/220-100UN
24/220-180UN
24/220-300UN
24/220-360UN

- +

Aggiungi alla richiesta 0

- +

Aggiungi alla richiesta 0

- +

Aggiungi alla richiesta 0

Invia email a noi Contattare ora Scarica come PDF

Dettaglio del prodotto

Parametri

Indagine ora

This type Embedded Power System is widely deployed in the Telecom/Industrial environment today, una nuova generazione “verde & Sistema di risparmio energetico ", aiming at outdoor low power mobile Telecom/Industrial power market, meeting the trend of Telecom base station development, saving construction cost and shortening time. The system is highly adaptable with environment, features with wide operating temperature range, meeting the demand of high level users.

Applicazioni

Adatto a POTENZA DEL CAMPO DI COMUNICAZIONE DA 1-10KW
1. Stazione di telecomunicazioni/base/attrezzatura via cavo
2. Stazione di comunicazione.
3. Data center per computer
4. Reti SCADA e apparecchiature dati
5. Base per telefono/cellulare
6. Stazioni radio base/Siti cellulari
7. Sala del centro di monitoraggio
8.Dispositivo Wi-Fi cittadino
9. Automobile di comunicazione di emergenza
10. Ferrovia & metropolitana
11. Sistemi di antenne distribuite
12. Marino & al largo
13. Sistemi di gestione degli edifici
14. Sistemi di allarme antincendio
15. controllo del sistema di servizi energetici /campo
16. centrale/stazione elettrica
17.Sistema di monitoraggio della potenza
18.Sistema di energia solare
19.Sistema di energia eolica

Vantaggi del prodotto

1.Widely operating range of AC input voltage: 90~290Vac n
2.60 amp output per module, 180 amp system capacity max for 2U （Whole system 600 amp max)
3.Perfect battery management, accessory battery temperature detector
4.Current/voltage switching tech with high efficiency: ≥93.2%
5.Temperature compensation, LLVD and BLVD protection
6.Compact 2U 19’ inch rackmount shelf
7.Real-time detection of operating status, sound-light alarm
8.Abnormal log record: input over/ under voltage protection, output over voltage protection, output over current protection,
9.output short circuit protection, over temperature alarm, AC loss alarm etc.

If you have some problems about Embedded Power System 3u dc 48v 150A switching power supply, o vuoi conoscere maggiori dettagli sull'inverter per telecomunicazioni con montaggio a rack,Sistema di raddrizzatore delle telecomunicazioni,Home Pure Sine Wave Inverter,Solar MPPT INVERTER,Convertitore da CC a CC, ecc. Non esitare a contattarci!

In attesa della tua richiesta !

Sistema di alimentazione incorporato 3U DC 48V 150A Alimentatore di commutazione

Prossimo

DC 48V 10000 Watt Inverter 10kva Pure Wave Sine Power Inverter Telecom 4U Rack Mount Inverter

Invia il tuo messaggio a noi:

Raccomandazione del prodotto

NO.	Articolo		Technical Specifications
1	Environmental Requirements	Operating temperature	-40℃~55℃(-40 to +131°F)
		Storage temperature	-45℃~70℃ (-40 to +158°F)
		Relative humidity RH	5%~95%RH（40±2℃，no condensation）
		Atmospheric pressure	62kPa~106kPa
		Altitudine	0m~2000m
		Degree of protection	IP20
2	AC Distribution	Input mode	Single phase input
		Tensione in ingresso	220Vac
		Intervallo di tensione	90V ~ 290VAC
		Frequenza	45 Hz ~ 65Hz
		System efficiency	≥93.2% （@230Vac，Peaking）
		System input power factor	≥0.99（@230Vac，full load）
		THD	＜5% （@230Vac，full load）
		System protection function	AC overvoltage& under-voltage protection; DC overvoltage&under- voltage.current limit.short circuit protection; battery and rectifier over temperature protection; automatic restoration happens after the over-voltage.over-current.under-voltage and over-temperature disappear.
3	DC Distribution	System output voltage	Rated output：24VDC
		System output voltage	Adjustable range: 20VDC-30VDC continuously adjustable
		System output current	24V/30A
		System load regulation	≤±0.5%
		System voltage regulation	≤±0.5%
		System stability precision	≤±0.5%
		Current sharing capability	module current sharing not more than ±5％
		Phone balance weight noise	≤2mV（@230Vac，full load）
		Peak-peak noise voltage	≤200mv(0 MHz ~ 20MHz) （@220Vac，half load ~ full load）
		system current limit value	Power system: 1-33UN,Note: can be settable continuously
		System voltage drop	At full load. the voltage drop of DC distribution within the rack shall below 500 mV
		Output distribution	Load distribution:3@ 135A Rail Mount Terminal
		Battery distribution	Battery distribution：1*@135A Rail mount Terminal
4	Module And Monitoring Unit	Rectifier hot-swap	Hot-swap available.not influencing system operation
		Rectifier indication	with operation.alarm.and fault indicators
		Soft start time	3s-10s
		rectifier fault influence	Not influencing the set parameters of rectifier when rectifier at fault
		Monitoraggio remoto	With remote metering & remote control & remote signaling functions. providing standard RS485&TCP/IP Interface and 6 sets of the dry contact output port & Battery Temp.Sensor
		Monitoring unit	English language in LCD screen of the rectifier,
		Monitoring unit	The parameters can be set through the monitoring unit. with parameter set and power-failure data store functions. Max 1000 Units vents.
		Metodo di installazione	Rectifier module support swappable
		Remote control	rectifier start and close.battery test. equalize and float charging ,DIN /DO configuration and so on
		Alarm functions	With AC over voltage/under voltage.DC voltage over/under.module Communication fault and over temperature alarm,Battery remove,Surge and so on
5	Safety	Insulation resistance	Testing voltage 500VDC， Insulation Resistance ≥10M (normal atmospheric pressure, normal temperature, relative humidity <90%, no condensation)
		Insulation strength	Input to output: 3500VDC @1min&leak current ≤10mA
			Input to enclosures: 3500VDC @1min&leak current ≤10mA
			Output to enclosures:750VDC @1min&leak current ≤10mA
		System leak current	≤3.5mA（2320Vac input）
		Grounding performance requirements	The system with operating ground and protection ground.with clear mark.the resistance between the enclosures of distribution and all palpable metal components and grounding nut is not more than 0.1Ω
		AC lightning protection	The equipment AC side can bear simulated lightning impulse Current of waveform 8/20μS and rated amplitude 40kA.(Opzionale)
		EMC	In accordance with EN55022 CLASS A,GB9254 CLASS A,FCC PART15 CLASS A,GB17626-1998,IEC 61000-3-2
6	Batty	Battery low voltage alarm and protection （BLVD）	When DC voltage below battery protection threshold value and there is no AC input. the battery protection alarm.lasting for 1 min.battery protection DC connect cut off.
6	Batty	Battery management function	With battery management function; with the function of the manual or automatic shift of equalized or float charging status of the battery.current limit charging at equalized state; Temperature compensation for the system output voltage,(equalized and float voltage can be adjusted automatically based on 1~2 00（adjustable）mV/cell/℃.the higher the battery temperature.the lower the float voltage.).
7	others	Rumore	≤55dB (UN) (measured at 1m distance from the equipment)
		MTBF	≥ 100000 hours
		Impact and vibration	1. Can bear impact of peak acceleration 150m/s2 lasting for 11ms
		Impact and vibration	2. Can bear sine wave vibration of frequency (10 ~ 55)Hz and amplitude 0.35mm.
		Material flame retardant performance	1.The flame retardant class of PCB used in system and module controller meet V-0 requirements of GB4943.
			2.UL certificated flame retardant cable is adopted.
			3.The flame retardant class of insulation materials meets V-1 requirements of UL regulations.
8	Mechanical Data	Chassis coating	Meeting damp-proof and corrosion-proof requirements.there is a surface coating on the enclosures. which meets below requirements:
			1. Making the adhesion test in accordance with ISO 2409. reaching 0 class.
			2. Making a pencil hardness test in accordance with ASTM D3363.not less than 2H.
			3. Making impact test in accordance with ASTM D2794.reaching 50kg.cm.
			4. Making salt frog
		Cabinet material	Material: CRCA ; thickness:1.5mm
		Dimensioni (W×D×H)	Cabinet: 482mm×410mm×88mm (W×D×H)
		Peso (kg)	Appro: 15kg